Network Video Recorder User Manual
118
ď€
â—Ź
Refer to Chapter 11 and Chapter 12 VCA Event Alarm for details for event and alarm
settings.
â—Ź
Refer to Chapter 7.7 Configure Event Triggered Recording for the event triggered recording
settings.
10.1.6 Play by Sub-periods
Purpose:
The video files can be played in multiple sub-periods simultaneously on the screens.
Step 1 Go to Playback.
Step 2 Select Sub-periods from the drop-down list in the upper-left corner of the page to enter the
Sub-periods Playback interface.
Step 3 Select a date and start playing the video file. Select the Split-screen Number from the
dropdown list. Up to 16 screens are configurable.
Figure 10-8 Interface of Sub-periods Playback
ď€
According to the defined number of split-screens, the video files on the selected date can be
divided into average segments for playback. E.g., if there are video files existing between 16:00 and
22:00, and the 6-screen display mode is selected, then it can play the video files for 1 hour on each
screen simultaneously.