Network Video Recorder User Manual
176
●
Each item should be corresponding with the device port, including server port, http port,
RTSP port and https port.
●
The virtual server setting interface below is for reference only, it may be different due to
different router manufactures. Please contact the manufacture of router if you have any
problems with setting virtual server.
Figure 16-5 Setting Virtual Server Item
16.6 Configure SNMP
Purpose
You can configure SNMP settings to get device status and parameter information.
Before You Start
Download the SNMP software to receive device information via SNMP port. By setting the trap
address and port, the device is allowed to send alarm event and exception message to the
surveillance center.
Step 1 Go to System > Network > Advanced > SNMP.
To Next Page
Loading...
Need help?
General
