Network Video Recorder User Manual
201
Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5
Minutes, then the system will exit from the current operation menu to live view screen after
5 minutes of menu inactivity.
Enable HDMI/VGA/LCD Simultaneous Output: Enable/disable HDMI/VGA/LCD simultaneous
output. For details, refer to 5.7 Main and Auxiliary Ports Strategy.
Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
Enable CVBS: Enable/disable CVBS output. After enabling CVBS, the menu output mode will
switch to HDMI2, and it will disable HDMI1/VGA.
Enable Wizard: Enable/disable the Wizard when the device starts up.
Enable Password: Enable/disable the use of the login password.
Step 3 Click the Apply button to save the settings.
19.2 Configure Date & Time
Step 1 Go to System > General.
Step 2 Configure the date and time.
Time Zone: Select the time zone.
Date Format: Select the date format.
System Date: Select the system date.
System Time: Set the system time.
Figure 19-2 Date and Time Settings
Step 3 Click the Apply button to save the settings.
19.3 Configure DST Settings
The DST (daylight saving time) refers to the period of the year when clocks are moved one period
ahead. In some areas worldwide, this has the effect of creating more sunlit hours in the evening
during months when the weather is the warmest.
We advance our clocks ahead a certain period (depends on the DST bias you set) at the beginning
of DST, and move them back the same period when we return to standard time (ST).
To Next Page
Loading...
Need help?
General
