HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series User Manual

Network Video Recorder User Manual
86
Step 2 Click Format.
Step 3 Click Yes to initialize SSD.

Initializing SSD will erase its data, including those in face picture library, and cancel the alarms
linked to the library. The device will restart after initialization.
7.1.4 Configure eSATA for Data Storage
When there is an external eSATA device connected to device, you can configure eSATA for the data
storage, and you can manage the eSATA in the device.
Step 1 Click Storage>Advanced.
Step 2 Select the eSATA type to Export or Record/Capture from the dropdown list of eSATA.
Export: use the eSATA for backup.
Record/Capture: use the eSATA for record. Refer to the following steps for operating
instructions.
Figure 7-4 Set eSATA Mode
Step 3 When the eSATA type is selected to Record/Capture, enter the storage device interface.
Step 4 Edit the property of the selected eSATA, or initialize it is required.
7.2 Storage Mode
7.2.1 Configure HDD Group
Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings.
Step 1 Go to Storage> Storage Device.
Step 2 Check the checkbox to select the HDD to set the group.

HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series Specifications

General

Brand	HIKVISION
Model	DeepinMind iDS-6700NXI-I/8F(B) Series
Category	Network Hardware
Language	English