It stands for the quality of face to trigger quick shot.
Max. Capture Interval
It refers to the max. me occupaon for one quick shot.
Capture Times
It refers to the capture
mes a face will be captured during its stay in the congured area.
Remove Duplicated Faces
This funcon can lter out repeated captures of certain face.
Similarity Threshold for Duplicates Removing
It is the similarity between the newly captured face and the picture in the duplicates removing
library. When the similarity is higher than the value you set, the captured picture is regarded
as a duplicated face and will be dropped.
Duplicates Removing Library Grading Threshold
It is the face grading threshold that triggers duplicates checking. When the face grading is
higher than the set value, the captured face is compared with the face pictures that are
already in the duplicates removing library.
Duplicates Removing Library Update Time
Every face picture is kept in the duplicates removing library for the set update
me.
Face Exposure
Check the checkbox to enable the face exposure.
Reference Brightness
The reference brightness of a face in the face exposure mode. If a face is detected, the
camera adjusts the face brightness according to the value you set. The higher the value, the
brighter the face is.
Min.
Duraon
The minimum duraon of the camera exposures the face.
Note
If the face exposure is enabled, please make sure the WDR funcon is disabled, and the
manual iris is selected.
Face Filtering Time
It means the me interval between the camera detecng a face and taking a capture acon.
If the detected face stays in the scene for less than the set ltering me, capture will not be
triggered. For example, if the face ltering me is set as 5 seconds, the camera will capture
the detected face when the face keeps staying in the scene for 5 seconds.
Network Camera User Manual
85
To Next Page
Loading...
Need help?
General
