HIKVISION DS-2CD3066G2-IS User Manual

Select a mode according to the installaon scene.
Filter
Target Size
It stands for the size of the target detecon window. A target larger than this pixel can be
counted as a real target. It can remove the false alarm of a certain
xed target.
Displacement
It stands for target displacement or the target width. A target will not be counted if its
displacement is less than the set percentage.
Min.
Waing Duraon
Waing me shorter than the set value will be ltered.
Validity
The higher the threshold is, the more dicult a target will be detected, but the higher the
accuracy is.
Note
The ltering sengs should be operated by the professionals. The lter sengs can adjust the
algorithm for detecon to change the detecon range, sensivity, etc.
10.6 People Counng
People counng is used to calculate the number of people entering or exing an area.
Note
●
For certain device models, you need to enable People Counng on VCA page rst.
●
The funcon is only supported by certain device models.
10.6.1 Set People Counng Rule
Aer seng the detecon rules and algorithm parameters, the device calculates the number of
people entering or
exing in the rule region, triggers linkage acons and uploads data
automacally.
Before You Start
●
Go to VCA → Select Applicaon , select People Counng and click Next to enable the funcon.
●
For the device
supporng HEOP, go to VCA to import and enable People Counng.
Steps
1.
Go to VCA → Set Applicaon → People Counng → Rule .
2.
Check Enable to enable the funcon.
3.
Click Add to add a detecon region.
Network Camera User Manual
91

HIKVISION DS-2CD3066G2-IS Specifications

General

Brand	HIKVISION
Model	DS-2CD3066G2-IS
Category	Security Camera
Language	English