HIKVISION DS-2CD3066G2-IS User Manual

Note
The funcon is only supported by certain models. The actual funcon varies according to
dierent models.
6.7 Set Defocus Detecon
The blurred image caused by lens defocus can be detected. If it occurs, the device can take linkage
acons.
Steps
1.
Go to Conguraon → Event → Event and Detecon → Defocus Detecon .
2.
Check Enable.
3.
Set
Sensivity. The higher the value is, the more easily the defocus image can trigger the alarm.
You can adjust the value according to the actual environment.
4.
For the linkage method
sengs, refer to Linkage Method Sengs .
5.
Click Save.
Note
The funcon is only supported by certain models. The actual display varies with models.
6.8 Set Scene Change Detecon
Scene change detecon funcon detects the change of the scene. Some certain acons can be
taken when the alarm is triggered.
Steps
1.
Go to
Conguraon → Event → Event and Detecon → Scene Change Detecon .
2.
Click Enable.
3.
Set the
Sensivity. The higher the value is, the more easily the change of scene can be detected.
But the detecon accuracy is reduced.
4.
Refer to
Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
5.
Click Save.
Note
The funcon is only supported by certain models. The actual display varies with models.
Network Camera User Manual
42

HIKVISION DS-2CD3066G2-IS Specifications

General

Brand	HIKVISION
Model	DS-2CD3066G2-IS
Category	Security Camera
Language	English