HIKVISION DS-2CD3066G2-IS User Manual

3.1.10 Lens Parameters Adjustment
PTZ is an abbreviaon for pan, lt, and zoom. It means the movement opons of the device. In live
view interface, you can click the
direcon control buons to control the pan/lt movement, and
click the zoom/focus/iris buons to realize lens control.
Note
●
Supported PTZ funcons may vary according to dierent camera models.
●
For the devices which support lens movements only, the direcon buons are invalid.
Direcon Control
Click and hold the direcon buon to pan/lt the device.
Zoom
●
Click , and the lens zooms in.
●
Click
, and the lens zooms out.
Focus
●
Click , then the lens focuses near and the nearby object gets clear.
●
Click , then the lens focuses far and the distant object gets clear.
Iris
●
When the image is too dark, click to enlarge the iris.
●
When the image is too bright, click
to stop down the iris.
PTZ Speed
●
Slide to adjust the speed of the pan/lt movement.
3.1.11 Conduct 3D
Posioning
3D posioning is to relocate the selected area to the image center.
Steps
1.
Click to enable the funcon.
2.
Select a target area in live image.
Network Camera User Manual
8

HIKVISION DS-2CD3066G2-IS Specifications

General

Brand	HIKVISION
Model	DS-2CD3066G2-IS
Category	Security Camera
Language	English