DS-7108HI-S series Net DVR User Manual
26
Fig. 4.12 Playback list
Step 3: Select backup device
Please confirm the backup device: USB disk, USB HDD, USB CD-R/W, and select the
corresponding backup device.
Step 4: Start and finish backup
Move “Active Frame” to “Copy” button and you can press [ENTER] key to start to backup.
When backup is started, corresponding message box will pop-up to indicate the process.
Backup video segment
You can also backup the image segments when playback. The steps are:
1) Enter the interface of playback the files or playback by time;
2) Press [EDIT] key to start selecting the current playback image, and press [EDIT] again
to stop selecting. This segment is selected;
3) You can repeat step 2 to select many segments. 30 segments can be selected in all;
4) After you select all segments, press [ESC] key, a message window will pop-up. If you
press “Confirm” button, DVR will start to backup the selected segments. If you press
“Cancel” button, DVR will abort backup.
Playback the video segment
You can use our file player software to playback the video segment in PC. You can find the
player software in attached CD.
Exit playback interface
Please refer to chapter 4.6.
4.9 Shut down DVR
Note: If you just shut down the system, the fan in DVR still will be running except to
turn off the power from rear panel directly.
To Next Page
Loading...
Need help?
General