HIKVISION DS-7108HI-S Series User Manual

DS-7108HI-S series Net DVR User Manual
27
Chapter5 Parameters Setup Guide
Only the users who have “Parameters Setup” right need to read this chapter. When the
following parameters are modified and saved, you must reboot the DVR to make the new
parameters become effective. Others do not need to reboot the device.
 Any network parameters
 resolution and record schedule
 External alarm sensor type
 View tampering alarm schedule
 Video loss alarm schedule
 Motion detection alarm schedule
 External alarm schedule
 Alarm output schedule
5.1 Administrator and Password
When DVR is left from factory, there is one default administrator. The name is “admin” and
password is “12345”. The name cannot be changed while the password can be modified.
Password modification
Press[MENU]key, in the login dialog, select the username as “admin”, use[→]key, move
cursor to password edit box, input “12345”, press “Confirm” to enter the administrator menu.
Fig. 5.1 Enter user menu
Move “Active Frame” to “User” icon, press [ENTER] key to enter “User Management”
menu. Shown as Fig.5.2 below

HIKVISION DS-7108HI-S Series Specifications

General

Brand	HIKVISION
Model	DS-7108HI-S Series
Category	DVR
Language	English