User Manual of Digital Video Recorder
129
The HTTP port is used for remote IE access.
9.2.10 Configuring HTTPS Settings
Purpose:
HTTPS (Hyper Text Transfer Protocol Secure) ensures the data transferred is encrypted using Secure Socket
Layer (SSL) or Transport Layer Security (TLS). HTTPS provides authentication of the web site and associated
web server that one is communicating with and create a secure channel over an insecure network.
HTTPS URLs begin with https:// and use port 443 by default. You can modify the port No. as desired.
Example:
If you set the port No. as 445 and the IP address of the device is 192.0.0.64, you can access the device by
inputting https://192.0.0.64:445 in the web browser.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the More Settings tab to enter the More Settings interface.
3. Check checkbox to enable the HTTPS.
Figure 9. 25 HTTPS Settings
4. Enter the HTTPS Port in the text fields. The default HTTPS Port is 443, and you can change it according
to different requirements.
5. Click to save and exit the interface.
Note: The HTTPS Port should be set to the range of 1-65535.
9.2.11 Configuring High-speed Download Settings
Purpose:
You can enable the High-speed Download function to widen the outgoing bandwidth of the device. In this way
you can speed up the download of record files through web browser or CMS software.
Note: If you enable the high-speed download function, the local menu operation will be affected. It is
recommended to disable this function after finishing the remote download of record files.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the More Settings tab to enter the More Settings interface.
To Next Page
Loading...
Need help?
General