User Manual of Digital Video Recorder
75
Note:
Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate
specific frames.
6.1.3 Playing Back by Event Search
Purpose:
Play back record files on one or several channels searched out by restricting event type (e.g. alarm input and
motion detection).
Steps:
1. Enter the playback interface.
Menu>Playback
2. Click and select to enter the Event Playback interface.
3. Select Alarm Input as the event type, and edit the Start time and End time.
Figure 6. 8 Event Playback Interface-Alarm Input
4. Click to get the search result information listed in the right-side panel.
Figure 6. 9 Result of Video Search by Alarm Input
To Next Page
Loading...
Need help?
General