User Manual of Digital Video Recorder
176
• Local Camera Management: Enabling and disabling analog camera (s). Adding, deleting and
editing of network camera (s).
• Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD
property), upgrading system firmware, clearing I/O alarm output.
• Local Shutdown /Reboot: Shutting down or rebooting the device.
Remote Configuration
• Remote Log Search: Remotely viewing logs that are saved on the device.
• Remote Parameters Settings: Remotely configuring parameters, restoring factory default
parameters and importing/exporting configuration files.
• Remote Camera Management: Remotely enabling and disabling analog camera (s), and adding,
deleting and editing of network camera (s).
• Remote Serial Port Control: Configuring settings for RS-485 ports.
• Remote Video Output Control: Sending remote control panel signal.
• Two-way Audio: Realizing two-way radio between the remote client and the device.
• Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote
client) and controlling the alarm output.
• Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting
HDD property), upgrading system firmware, clearing I/O alarm output.
• Remote Shutdown/Reboot: Remotely shutting down or rebooting the device.
Camera Configuration
• Remote Live View: Remotely viewing live video of the selected camera (s).
• Local Manual Operation: Locally starting/stopping manual recording, picture capturing and
alarm output of the selected camera (s).
• Remote Manual Operation: Remotely starting/stopping manual recording, picture capturing and
alarm output of the selected camera (s).
• Local Playback: Locally playing back recorded files of the selected camera (s).
• Remote Playback: Remotely playing back recorded files of the selected camera (s).
• Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).
• Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).
• Local Video Export: Locally exporting recorded files of the selected camera (s).
7. Click to save the settings and exit interface.
Note: Only the admin user account has the permission of restoring factory default parameters.
13.4.2 Deleting a User
Steps:
1. Enter the User Management interface.
Menu > Configuration > User
2. Select the user to be deleted from the list.
To Next Page
Loading...
Need help?
General