User Manual of Digital Video Recorder
28
Figure 2. 15 IP Camera Management
3. For the encoders with multiple channels, check checkbox in the pop-up window to select the channels
and click to finish adding.
Figure 2. 16 Selecting Multiple Channels
2.2.2 Configuring the Connected IP Cameras
Editing the connected IP cameras
Purpose:
After the adding of the IP cameras, the basic information of the camera lists in the page, and you can configure
the basic setting of the IP cameras.
Steps:
1. Click to edit the parameters; you can edit the IP address, protocol and other parameters.
To Next Page
Loading...
Need help?
General