Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
44
Choose Pedestrian when you monitor the
pedestrians.
Choose Non-motor Vehicle when you monitor
the non-motor vehicles.
Choose Motor Vehicle when you monitor the
motor vehicles.
You are recommended to set it as Auto when
the application scene of the speed dome is
complicated.
To avoid blurred image resulted from fast zoom, you can check Enable Proportional
Pan in Configuration → PTZ → Basic Settings. If you enable this function, the
pan/tilt speed change according to the amount of zoom. When there is a large
amount of zoom, the pan/tilt speed will be slower for keeping the image from
moving too fast on the live view image.
Zoom in/out
Click the button, and the lens zooms in.
Click the button, and the lens zooms out.
Note
● You can set Zooming Speed in Configuration → PTZ → Basic Settings. The higher the value is,
the faster the zooming speed is.
● You can set Zoom Limit in Configuration → Image → Display Settings → Other to limit the
maximum value of the total zoom (digital zoom and optical zoom).You can set Synchronized
Zoom in Configuration → PTZ → Basic Settings to synchronize the zoom settings in the optical
channel and the thermal channel.
Focus
Click the button, then the lens focuses near
and the object nearby gets clear.
Click the button, then the lens focuses far and
the object far away gets clear.
To Next Page
Loading...
Need help?
General
