Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
72
and Expert modes are selectable.
Normal
Set the DNR level to control the noise reduction degree. The higher level means stronger
reduction degree.
Expert
Set the DNR level for both space DNR and time DNR to control the noise reduction degree. The
higher level means stronger reduction degree.
OFF
Disable the DNR function.
11.4.14 OIS
OIS (Optical Image Stabilization) reduces the effects of vibration in a video in order to increase the
stability of the video.
Normal
The camera enable OIS automatically, which can modify most unstable situations.
Expert
You can customize the level and sensitivity of OIS as needed.
11.4.15 EIS
Increase the stability of video image by using jitter compensation technology.
11.4.16 Defog
You can enable the defog function when the environment is foggy and the image is misty. It
enhances the subtle details so that the image appears clearer.
11.4.17 Set Palette
You can select the palette mode to display the thermal grayscale image to colored image.
Steps
1. Go to Configuration → Image → Display Settings.
2. Select the thermal channel.
3. Select a palette mode in Image Enhancement according to your need.
Result
The live view displays the image with palette.
To Next Page
Loading...
Need help?
General
