Network Video Recorder User Manual
175
12.7 Advanced Search
The NVR supports the advanced search for fire/ship/temperature/temperature difference
detection triggered alarm and the recorded video files and pictures.
Before you start
To get the smart search result, the corresponding fire/ship temperature/temperature difference
type must be enabled and configured on the connected thermal network camera (Configuration >
Advanced Configuration> Smart Event). Please refer to the user manual of the thermal network
camera for details.
Step 1 Menu >VCA Search >Advanced Search.
Step 2 Select the camera (s) for the advanced search.
Figure 12-16 Advanced Search
Step 3 Specify the start time and end time for searching the thermal imaging detection results.
Step 4 Select the type to fire detection, ship detection, temperature detection and temperature
difference detection.
Step 5 Click Search to start searching. The search results are displayed in list or in chart.