Network Video Recorder User Manual
39
Chapter 3 Camera Management
3.1 Managing the IP Cameras
Purpose:
The main function of the NVR is to connect the network cameras and record the video got from it.
So before you can get a live view or record of the video, you should add the network cameras to
the connection list of the device.
Before you start:
Ensure the network connection is valid and correct. For detailed checking and configuring of
the network, please see Chapter Checking Network Traffic and Chapter Configuring Network
Detection.
Before adding the camera, make sure the IP camera to be added is in active status.
3.1.1 Adding the IP Cameras
Step 1 Enter the Add IP Camera interface.
Step 2 Click to select an idle window in the live view mode.
Step 3 Click the icon in the center of the windw to pop up the adding IP camera interface.
Figure 3-1 Icon of Adding IP Camera
Step 4 Select the detected IP camera and click the Add button to add it directly, and you can click
the Search button to refresh the online IP camera manually.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
