Deskstar T7K500 Hard Disk Drive Specification
87
10.7.4.2 User Password setting
When a User Password is set, the device will automatically enter lock mode the next time the device is powered on.
Table 61: Initial setting
10.7.4.3 Operation from POR after user password is set
When Device Lock Function is enabled, the device rejects media access command until a Security Unlock command
< Setting password >
POR
Set Password with User Password
Normal operation
Power off
Device locked mode
POR
< No setting password >
POR
Normal operation
Power off
Device unlocked mode
POR
To Next Page
Loading...
Need help?
General