Deskstar T7K500 Hard Disk Drive Specification
95
10.10 Write cache function
Write cache is a performance enhancement whereby the device reports the completion of the write command (Write
Sectors, Write Multiple, and Write DMA) to the host as soon as the device has received all of the data into its buffer.
The device assumes the responsibility for subsequently writing the data onto the disk.
• While writing data after completed acknowledgment of a write command, soft reset or hard reset does not
affect its operation. However power off terminates the writing operation immediately and unwritten data is
lost.
• The Soft reset, Standby (Immediate) command, and Flush Cache commands during the writing of the cached
data are executed after the completion of writing to media. So the host system can confirm the completion of
write cache operation by issuing a Soft reset, Standby (Immediate) command, or Flush Cache command to
the device. before power off.
To Next Page
Loading...
Need help?
General