3–8 z 3.2 Printing Characters Section 3
5. Press [ • ],
The "." mark appears.
[YY • • • • • • ]
6. Press [Month] twice.
The display then shows [YY. MM • • • • • ],
If you press [Month] only once, only the last digit of the month will be printed.
7. Press [ • ].
The display then shows [YY. MM • • • • • ].
8. Press [Day] twice.
The display then shows [YY. MM. DD • • ].
If you press [Day] only once, only the one last digit of the day will be printed.
You do not have to
press the [Decision]
key except when in
"Ready" state.
9. Press [Apply].
10. Press [Back].
You are then returned to the "Print description" screen. The print image area shows
"USE BY 05.07.07".
3.2.3 Printing the characters indicating the number of
elapsed days
3.2.3-1 Overview
z The following procedure is used to print the number of days elapsed since
January 1.
z Entries are made on the special keyboard.
z Using the elapsed days function allows you to print the current number of days
elapsed since January 1 in accordance with the internal calendar.
z The table below shows the difference between a common year and a leap year.
3.2.3-2 Operating procedure
z Entering a 3-digit value into the second line to print the number of elapsed days.
General instructions
on the modification of
settings:
Section 2.1.3,
"Operations for
Modifying the Setting
Contents".
1. From the "Print description" screen, press [Edit message].
1/1 1/2 • • • 2/28 2/29 3/1 • • • 12/31
Common year 1 2 • • • 59 — 60 • • • 365
Leap year 1 2 • • • 59 60 61 • • • 366
(GLW
PHVVDJH
3ULQWIRUPDW
3ULQWVSHF
6HOHFW
PHVVDJH
6DYH
PHVVDJH
0DLQWH
QDQFH
$X[LOLDU\
IXQFWLRQ
(QYLURQPHQW
VHWXSPHQX
6KRZ
IDXOW:DUQLQJ
3ULQWGHVFULSWLRQ
6WDWXV5HDG\
0HVVDJHQDPH
0DQXDO
6KXW
GRZQ
(GLW
PHVVDJH
3ULQWIRUPDW
3ULQWVSHF
6HOHFW
PHVVDJH
6DYH
PHVVDJH
0DLQWH
QDQFH
$X[LOLDU\
IXQFWLRQ
(QYLURQPHQW
VHWXSPHQX
6KRZ
IDXOW:DUQLQJ
To Next Page
Loading...
Need help?
General
