Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden-9507018) -
2016 - crc - 11/19/15
126 Driving and Operating
Caution
Use of low quality fuel or fuel with
too low an octane number may
damage the engine, the catalytic
converter or electronic
components.
Unburnt petrol will overheat and
damage the catalytic converter.
Therefore avoid excessive use of
the starter, running the fuel tank
dry and starting the engine by
pushing or towing.
If the engine misfires, runs
unevenly, engine performance is
reduced or other problems occur,
contact a Holden Dealer as soon as
possible.
In an emergency, drive for a short
period, keeping the vehicle and
engine speed low.
Automatic
Transmission
Continuously Variable
Transmission (CVT)
The CVT is electronically controlled
to continuously provide the optimal
gear ratio as you drive.
Starting the vehicle
1. Press the brake pedal while
moving the shift lever to either
the R, D or L position.
Caution
Do not shift between D (drive)
and R (reverse) or P (park) while
the vehicle is moving.
2. Release the park brake and the
brake pedal.
3. Slowly press the accelerator
pedal.
Transmission Display
The selected gear is indicated in the
instrument cluster.
Shift lever
P : (park) In park position, the front
wheels are locked. Select P only
when the vehicle is stationary and
the parking brake is applied.
R : (reverse) Place in reverse only
when the vehicle is stationary.
N : (neutral)
D : (drive) Used for general driving.
To Next Page
Loading...
Need help?
General
