Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden-9507018) -
2016 - crc - 11/19/15
64 Instruments and Controls
Displays an estimate of the
remaining useful oil life. This may
only be displayed while the vehicle
is stationary.
If the number 98 is displayed, it
means 98% of the current oil life
remains.
When the remaining oil life is low,
the vehicle message Code 82 or
Change
: % (oil change) will be
displayed.
The engine oil should be changed
as soon as possible.
After an engine oil change, the
engine oil life system will be reset
by your Holden Dealer.
How to Reset the Engine Oil
Life System
Reset the system whenever the
engine oil is changed so the system
can calculate the next engine oil
change.
1. Turn the ignition On with the
engine not running.
2. Press the MENU button on the
turn signal lever to select the
Engine oil life display in the
Driver Information
Centre (DIC).
3. Press the SET/CLR button to
reset the oil life to 100%.
4. Turn the ignition Off.
Take care not to reset the display
accidentally at any time other than
after the oil is changed.
If the vehicle message code 82
(Change engine oil soon) comes
back on when the vehicle is started,
the engine oil life system has not
reset. Repeat the procedure.
Service Information 0 189.
Vehicle Messages
Messages are indicated mainly in
the Driver Information Centre (DIC),
in some cases together with a
warning and signal buzzer.
Press SET/CLR, MENU or turn the
adjuster wheel to confirm a
message.
Note
Not all of the following messages
will be applicable to your vehicle.
The vehicle messages are
displayed as code numbers.
To Next Page
Loading...
Need help?
General
