Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden-9507018) -
2016 - crc - 11/19/15
Lighting 77
Lighting Features
Exit Lighting
Set the headlamps to light the way
after leaving the vehicle.
Activation, deactivation and duration
of the lighting can be changed in the
vehicle settings.
Vehicle Personalisation 0 69.
1. Switch the ignition off.
2. Remove the ignition key.
3. Open the driver's door.
4. Pull the turn signal lever
rearward once (high beam
flash).
5. Close the driver’s door and
lock as desired.
Note
Exit lighting is activated for the
period set in the vehicle settings.
Battery Power Protection
The battery saver feature is
designed to protect the vehicle’s
battery.
If some interior lamps are left on
and the ignition is turned off, the
battery rundown protection system
automatically turns the lamp off after
some time.
To Next Page
Loading...
Need help?
General
