Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden-9507018) -
2016 - crc - 11/19/15
134 Driving and Operating
Ride Control Systems
Traction Control
System (TCS)
TCS improves driving stability when
necessary, regardless of the type of
road surface or tyre grip, by
preventing the driving wheels from
spinning.
As soon as the driving wheels start
to spin, engine output is reduced
and the wheels are braked
individually. This considerably
improves the driving stability of the
vehicle on slippery road surfaces.
TCS is activated as soon as the
ignition is turned on.
{
Warning
Do not let this special safety
feature tempt you into taking risks
when driving.
Adapt speed to the road
conditions.
Control indicator
G. Electronic
Stability Control (ESC) Indicator
Light 0 61.
Deactivation
TCS can be switched off when
spinning of drive wheels is required:
1. Press
g.
i illuminates
To reactivate TCS:
1. Press
g again.
TCS is also reactivated the
next time the ignition is
turned on.
Fault
If there is a fault in the system the
control indicator
G illuminates
continuously and a message or a
warning code appears in the Driver
Information Centre. The system is
not operational.
Have the cause of the fault
remedied by a Holden dealer.
Electronic Stability
Control (ESC)
ESC:
.
Improves driving stability in any
driving situation.
.
Assists in maintaining vehicle
stability when the vehicle's grip
level is exceeded such as a
sudden lane change, slippery or
unexpected road conditions.
.
Alters engine power and/or
braking on specific wheels,
improving the vehicle's steering
control and power delivery, on
wet or slippery roads,
particularly on snow and ice.
To Next Page
Loading...
Need help?
General
