Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden-9507018) -
2016 - crc - 11/19/15
152 Vehicle Care
1. Engine air filter
2. Engine oil filler cap
3. Dipstick for engine oil
4. Engine coolant reservoir
5. Brake/clutch fluid reservoir
6. Battery
7. Washer fluid reservoir
8. Fuse box
Engine Oil
Checking oil level
.
Check the engine oil level before
a long journey.
.
The engine must be at operating
temperature and the ignition
turned off for at least 5 minutes.
1. Park the vehicle on a level
surface.
2. Remove the dipstick and wipe
clean.
3. Insert the dipstick firmly.
4. Remove and read the oil level.
The level should be at the MAX
mark. Add oil if the level is at
the MIN mark.
5. Insert the dipstick to the stop
on the handle and rotate half
a turn.
Adding engine oil
Capacities and Specifications 0 194.
1. Rotate the engine oil filler cap
anticlockwise and remove.
2. Add enough oil to reach below
the MAX mark on the dipstick.
3. Check the level on the dipstick
and add further oil if necessary.
The engine oil must not exceed
the MAX mark on the dipstick.
Caution
Overfilled engine oil must be
drained or suctioned out.
4. Replace the engine oil filler cap
tightly by rotating clockwise.
To Next Page
Loading...
Need help?
General
