116
MAINTENANCE
MAINTENANCE SCHEDULE
(1) Lubricate more frequently when used in salt water.
(2) These items should be serviced by your servicing dealer, unless you have the proper tools and <are> mechanically proficient. Refer to the
Honda Shop Manual for service procedures.
(3) For professional commercial use, log hours of operation to determine proper maintenance intervals.
(6) When there is 1/3 or more consumption, please exchange.
(10) Mechanical Remote Control type only.
Each
use
After
use
First
month
or
20 hrs.
Every
6 months
or
100 hrs.
Every
year
or
200 hrs.
Every
2 years
or
400 hrs.
Every
3 years
or
600 hrs.
Every
6 years
or
1200 hrs.
Refer
to
page
Engine oil Check level o 59
Change o o 118
Engine oil filter Replace o (2) —
Gear case oil Change o (2) o (2) —
Timing belt Check-adjust o (2) —
ACG belt Check-adjust o (2) —
Throttle linkage and Control Cable (10)
Check-adjust o (2) o (2) —
Valve clearance Check-adjust o (2) —
Spark plug (nickel) Check-adjust/Replace o 120
Spark plug (iridium) (Optional part) Check o —
(Optional part) Clean o (2) —
(Optional part) Replace o —
Propeller and Cotter pin Check o o 62
Anode metal (Outside engine) (6)
Check o o 66
Anode metal (Inside engine) Sleeve Check o (2) —
(6) Exhaust manifold Check o (2) —
V bank bottom Replace o (2) —
Idling speed Check-adjust o (2) o (2) —
Lubrication Grease o (1) o (1) 124
Fuel filter with water separator
(Low pressure side)
Check o o 125
Replace o 127
REGULAR SERVICE PERIOD (3)
Perform at every indicated month
or operating hour interval,
whichever comes first.
ITEM
42ZVL600.book 116 ページ ２０１８年７月１９日 木曜日 午前９時６分
To Next Page
Loading...
Need help?
General
