28
CONTROLS AND FEATURES
<Trolling Mode>
The engine speed can be adjusted
with the [-] switch and [+] switch
when in trolling mode.
If you press and hold the [+] switch
while cruising with the throttle
closed, the mode changes to trolling
mode.
FUNCTION SWITCHES
(D2 type)
Function switches are used for
operations in the fast idle mode,
trolling mode, one-lever mode and
station select mode.
<Fast Idle Mode>
The fast idle mode is only needed for
starting carbureted outboard models.
The BF200D, BF225D and BF250D
models use programmed fuel
injection so, this mode will not be
needed for starting.
After the engine starts and if the
outside temperature is below
5°C (41°F), the fast idle mode can be
used to accelerate engine warm up.
42ZVL600.book 28 ページ ２０１８年７月１９日 木曜日 午前９時６分
To Next Page
Loading...
Need help?
General
