95
OPERATION
Tilting the Outboard Motor
Tilt the outboard motor to prevent the
propeller and gear case from hitting
the bottom when the boat is beached
or stopped in shallow water.
Please tilt up simultaneously, when
you mount the dual type outboard
motor.
1. Move the shift lever or the control
lever to the NEUTRAL position
and stop the engine.
2. Press the UP of the power trim/tilt
switch and tilt the outboard motor
to the best position in compliance.
(D1 type)
POWER
TRIM/TILT
SWITCH
(D2 type)
(single type)
(dual type)
POWER
TRIM/TILT
SWITCH
POWER
TRIM/TILT
SWITCH
42ZVL600.book 95 ページ ２０１８年７月１９日 木曜日 午前９時６分
To Next Page
Loading...
Need help?
General
