89
OPERATION
• BF200D/BF225D:
When cruising at full throttle, note that the
engine speed must be in the range between
5,000 min
-1
(rpm) and 6,000 min
-1
(rpm).
BF250D:
When cruising at full throttle, note that the
engine speed must be in the range between
5,300 min
-1
(rpm) and 6,300 min
-1
(rpm).
• If you feel that the engine speed
jumped up when the hull jumped or at
ventilation, cruise the boat by returning
the throttle to the slow speed side.
• See “Propeller Selection” (page 56) for a relation
between the propeller and the engine speed.
For best performance, passengers and
equipment should be distributed
evenly to balance the boat.
Trolling Mode [-] Switch: Reduce engine speed
[+] Switch: Increase engine speed
After the engine has warmed up,
keeping [+] switch pushed when
cruising with the throttle fully closed,
changes the mode to trolling mode.
Do not operate without the engine cover.
Exposed moving parts could cause
injury; water may damage the engine.
[-] SWITCH [+] SWITCH
(ELECTRICAL REMOTE CONTROL
BOX and FLUSH-MOUNT type)
752// 752//752// 752//752//
)$67,'/(
752//
17
:$50
$&7
[-] SWITCH [+] SWITCH
(ELECTRICAL REMOTE CONTROL
BOX and TOP-MOUNT type)
42ZVL600.book 89 ページ ２０１８年７月１９日 木曜日 午前９時６分
To Next Page
Loading...
Need help?
General
