21
To “Conguring the settings” (P.8)
(10) Fuel Tank Preset
In the fuel tank setting, you can set the tank volume and
calibrate the fuel level sensor for up to four tanks. The fuel tank
setting function is hidden by default.
To use the fuel tank setting function, select BOAT SET from the
MENU screen rst and then press and hold the [
∧
] and [
∨
]
buttons simultaneously to display Fuel Tank Preset.
* If the setting is changed accidentally, the fuel level, cruising time,
and cruising distance may not be displayed appropriately. This item
is displayed only by a specic operation to prevent an accidental
setting.
[
∧
] and [
∨
] buttons
Press and hold them
simultaneously
* To display and calibrate the fuel level, you need to connect an
appropriate sensor to NMEA2000®.
●
Tank volume setting > Tank level calibration
1. Use the [
∧
] or [
∨
] button to select BOAT SET and press
and hold the [
∧
] and [
∨
] buttons simultaneously.
2. Make sure that Fuel Tank Preset appears and press the
[ENTER] button.
3. Use the [
∧
] or [
∨
] button to select the tank you want to set
and press the [ENTER] button.
4. Use the [
∧
] or [
∨
] button to select Tank Volume and press
the [ENTER] button.
5. Use the [
∧
] or [
∨
] button to select any tank volume (0 to
9999 liters or gallons) and press the [ENTER] button.
To Next Page
Loading...
Need help?
General
