Honda BF75 User Manual

41
To “Conguring the settings” (P.8)
(25) Alarms Pop-up
You can enable or disable the pop-up notication for the
following items:
No. Screen notation Notication description
1 Check Engine
Error involving engine control or
the security system
2 Over Temperature Engine overheating
3 Low Oil Pressure
Error involving pressure of the
engine oil
4 Water in Fuel Water mixed into the fuel system
5 Charge Indicator Error involving the charge system
6 Rev Limit Exceeded Engine over speed
7 Engine Emergency Stop Emergency stop switch activation
8 Warning Level 1
Error that requires particular
attention
9 Warning Level 2
Error other than those at Warning
Level 1
10 Power reduction Engine speed restriction
11 Maintenance Needed Time for periodic inspection
12 Sensor Malfunction One of the sensors is defective.
1. Use the [
∧
] or [
∨
] button to select SYSTEM and press the
[ENTER] button.
2. Use the [
∧
] or [
∨
] button to select Alarms Pop-up and
press the [ENTER] button.
3. Use the [
∧
] or [
∨
] button to select the item you want to
show or hide and press the [ENTER] button.
4. Use the [
∧
] or [
∨
] button to select ON or OFF and press
the [ENTER] button.

Honda BF75 Specifications

General

Full Throttle RPM Range	5000-6000 RPM
Starting System	Electric
Exhaust	Through Propeller
Lubrication	Wet Sump
Steering	Remote
Rated Power	75 HP
Cooling System	Water-cooled
Fuel Delivery	Programmed Fuel Injection
Fuel	Unleaded gasoline
Shaft Length	L: 508mm
Gear Shift	Forward, Neutral, Reverse
Trim Method	Power Trim & Tilt
Displacement	1496 cc (91.3 cubic inches)
Recommended Fuel	87 octane or higher