Honda BF75 User Manual

7
Specications
BF40
BF50
BF60
BF75
BF80
BF90
BF100
BF115
BF135
BF140
BF150
BF175
BF200
BF225
BF250
(mechanical model)
BF115
BF135
BF140
BF150
BF175
BF200
BF225
BF250
(DBW model)
BF350
Engine information display
○ ○ ○ ○ ○
Boat velocity display
Fuel level display
○ ○ ○ ○ ○
Error occurrence notication
○ ○ ○ ○ ○
DTC (Diagnostic Trouble Code)
display
-
○
*
○
*
○ ○
BOAT SET - - - -
○
Remaining time before
maintenance display
- - - -
○
GPS loss notication - - - -
○
* These specications may not be supported depending on the production period or type of DTC.
Power supply Rated voltage: 12 V
Operating voltage: 10 to 16 V
Communication system NMEA2000
Monitor TFT 4.3 inches
Size Height: About 125 mm (about 133 mm with the sun cover)
Width: About 125 mm (about 133 mm with the sun cover)
Thickness: About 54.2 mm
Diameter of mounting part: About φ 110 mm
Depth of mounting part: About 38.5 mm
Weight of main unit About 460 g (about 550 g with the sun cover)
Number of outboard motors
supported
Up to 4

Honda BF75 Specifications

General

Full Throttle RPM Range	5000-6000 RPM
Starting System	Electric
Exhaust	Through Propeller
Lubrication	Wet Sump
Steering	Remote
Rated Power	75 HP
Cooling System	Water-cooled
Fuel Delivery	Programmed Fuel Injection
Fuel	Unleaded gasoline
Shaft Length	L: 508mm
Gear Shift	Forward, Neutral, Reverse
Trim Method	Power Trim & Tilt
Displacement	1496 cc (91.3 cubic inches)
Recommended Fuel	87 octane or higher