Honda CB200 User Manual

II. INSPECTION ANO ADJUSTMENT
5. Remove all dust and other foreign particles from the
center of the rotor.
6. Remove the screen filter and wash in c.Jcan solvent
7. Al i gn the tab of the filter ca p ";th the mark on the filter
ro!Or; press the
cap into place in the rotor.
& Install all removed pans in the reverse order of the
removal Replace the crankcase cover gasket
if found to
be worn too badly beyond use ..
13. FUEL FILTER
I. Position the fuel valve to "S".
2 Loosen U,e fdter cap and remove the cap. O-ring and
screen filter from the fue l valve.
3. Wash the $Creen filter and filter cap in solvent and install
in their respective positlons.
4. lurn the fuel valve to the "ON" position. being sure that
the fuel is not leaking
Fig.
2-28 (I) Oil filter rotor
('.!) Screen filter
Fig.
2- 29 (l) Index ma rk (2) Tab
Fig. 2-30 (I) Position "S"
0
(1)
(2)
(3)
Fig. 2-31 (I)
Filter st.'.reen (2)
O-ring
(J)
Pue) filler ~•t>
9

Honda CB200 Specifications

General

Brand	Honda
Model	CB200
Category	Motorcycle Accessories
Language	English