Honda CB200 User Manual

56
JV . FRAME
8. REAR SUSPENSION
Fig. 4--69
( I ) Rear shock ah,orbcr assembly
( 2 ) Rear pipe
( 3) Joint rubber
( 4) Upper joint
( S ) Spring seal stopper
( 6 ) Rear shock ahsorber spring upper seat
( 1) Lock nut (9 mm)
( 8 ) Rear shock absorber stopper rubber
( 9 ) Rear shock absorber spring
(10) Rear damper
(11) Spring under seat
( 12) Spring adjuster
(I 3) Rear fender
(14) Urive chain case
( I 5) Rear fork
(16) Dust seal
(17) Rear fork bushing
( 18)
Rearfork coll ar
(19) Rear fork dust seal rubber
(20) Rear fork pivot bo lt
(21) Underrubber bushing
(22) Rear bruke stopper arm
Disassembly
Rear suspension
1. On CL200. remove the rnuft1er to take out the left rear
shock absorber,
~ Remove the bolts securing the rear pipe in place~ at
the same time, remove the rear shock absorber attaclting
cap nut
3. Remove the rear shock absorber by removing the bolt
al the bottom.
4. Compress the rear shock absorber using "Rear Shock
Absorber Compressor"
(Tool No. 07959 - 3290000) and
remove the spring seat stoppers. Take out the spring
seat, rear
shock absorber spring, spring joint, under
spring seat
and spring adjuster.
fig. 4-70 ( I} Rear pipe (2} Rear pipe bolt
(3) C•P nut (4) Bolt
Fig. 4-71 ( I) Rear shock absorber compressor

Honda CB200 Specifications

General

Brand	Honda
Model	CB200
Category	Motorcycle Accessories
Language	English