EasyManuals Logo

Honda CRF450L 2019 User Manual

Honda CRF450L 2019
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
Servicing Your Honda 95
Valve Clearance
1. Check that the spark plug hole packing (1) is in
good condition and replace it if necessary.
Apply engine oil to the spark plug hole packing
and install it to the cylinder head cover (2).
2. Check that the cylinder head cover packing (3)
is in good condition and replace it if necessary.
Clean and apply liquid sealant (TB1207B or
equivalent) to the cylinder head cover groove
(4)
in the shown and install the cylinder head
cover packing into the cylinder head cover
groove.
3. Check that the rubber seals (5) are in good
condition, replace them if necessary.
Install the rubber seals onto the cylinder head
cover with the “UP” marks (6) facing up.
4. Install the cylinder head cover (2) and tighten
the cylinder head cover socket bolts (7) to the
specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
5. Connect the
spark plug cap (8) and breather
tube (9).
6. Install the fuel tank and seat (pages 46, 50).
Cylinder Head Cover Installation
(1) spark plug hole packing
(2) cylinder head cover
(3) cylinder head cover packing
(4) cylinder head cover groove
(3)
(2)
(1)
(4)
(5) rubber seals
(6) “UP” marks
(2) cylinder head cover
(7) cylinder head cover socket bolts
(6)
(6)
(5)
(7)
(2)
(8) spark plug cap
(9) breather tube
(8)
(9)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda CRF450L 2019 and is the answer not in the manual?

Honda CRF450L 2019 Specifications

General IconGeneral
Engine Type449cc liquid-cooled single-cylinder four-stroke
Bore x Stroke96.0mm x 62.1mm
Compression Ratio12.0:1
Fuel SystemProgrammed Fuel Injection (PGM-FI), 46mm throttle body
Transmission6-speed
Rear BrakeSingle 240mm disc
Front Tire80/100-21
Rear Tire120/80-18
Rake (Caster Angle)28.5°
Wheelbase58.9 inches
Seat Height37.1 inches
Fuel Capacity2.0 gallons
IgnitionFull transistorized ignition
Ground Clearance12.4 inches
Front Suspension49mm inverted fork; 12.0 inches of travel
Rear SuspensionPro-Link Showa single shock, adjustable spring preload, compression and rebound damping
Front BrakeSingle 260mm disc
Curb Weight289 pounds
Valve TrainUnicam four-valve
Final DriveChain
Trail4.6 inches (118mm)

Related product manuals