EasyManuals Logo

Honda CRF450L 2019 User Manual

Honda CRF450L 2019
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
Servicing Your Honda 125
Brakes
Brake pad wear depends on the severity of usage
and track conditions. (Generally, the pads will
wear faster with wet and dirty track conditions.)
Inspect the brake pads at each regular maintenance
interval (pages 36, 37).
Front Brake Pads
Inspect the brake pads (1) through the front wheel
to determine the brake pad wear. If either brake
pad is worn anywhere to a thickness of 0.04 in (1.0
mm), both brake pads must be replaced.
Rear Brake Pads
Inspect the brake pads (1) from the rear side of the
caliper to determine the brake pad wear. If either
brake pad is worn anywhere to a thickness of 0.04
in (1.0 mm), both brake pads must be replaced.
Check that the front brake lever and rear brake
pedal assemblies are positioned properly
(page 122) and the securing bolts are tight.
Make sure there are no fluid leaks. Check for
deterioration or cracks in the hoses and fittings.
Check the operation of the brake light switch (1).
Hold the brake light switch and turn the adjusting
nut (2) in the direction A if the switch operates too
late, or turn the nut in the direction B if the switch
operates too soon.
Brake Pad Wear
(1) brake pads (3) brake disc
(2) front brake caliper
minimum
thickness indicator
0.04 in
(1.0 mm)
0.04 in (1.0 mm)
replace
wear indicator
grooves
(3)
(2)
(1)
(1)
(1) brake pads (3) brake disc
(2) rear brake caliper
minimum
thickness indicator
0.04 in
(1.0 mm)
replace
(3)
(2)
(1)
Other Inspections
Brake Light Adjustment
(1) brake light switch
(2) adjusting nut
(1)
(A)
(2)
(B)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda CRF450L 2019 and is the answer not in the manual?

Honda CRF450L 2019 Specifications

General IconGeneral
Engine Type449cc liquid-cooled single-cylinder four-stroke
Bore x Stroke96.0mm x 62.1mm
Compression Ratio12.0:1
Fuel SystemProgrammed Fuel Injection (PGM-FI), 46mm throttle body
Transmission6-speed
Rear BrakeSingle 240mm disc
Front Tire80/100-21
Rear Tire120/80-18
Rake (Caster Angle)28.5°
Wheelbase58.9 inches
Seat Height37.1 inches
Fuel Capacity2.0 gallons
IgnitionFull transistorized ignition
Ground Clearance12.4 inches
Front Suspension49mm inverted fork; 12.0 inches of travel
Rear SuspensionPro-Link Showa single shock, adjustable spring preload, compression and rebound damping
Front BrakeSingle 260mm disc
Curb Weight289 pounds
Valve TrainUnicam four-valve
Final DriveChain
Trail4.6 inches (118mm)

Related product manuals