EasyManuals Logo

Honda CRF450L 2019 User Manual

Honda CRF450L 2019
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #132 background imageLoading...
Page #132 background image
Wheels
126 Servicing Your Honda
Refer to Important Safety Precautions on page 33.
Keeping the wheels true (round) and maintaining
correct spoke tension are critical to safe
motorcycle operation. During the first few rides,
spokes will loosen more rapidly due to the initial
seating
of the parts. Excessively loose spokes may
result in instability at high speeds and the possible
loss of control.
It is not necessary to remove the wheels to perform
the recommended service in the Maintenance
Schedule (pages 36, 37).
However, information for wheel removal is
provided for emergency situations (page 167).
1. Inspect the wheel rims (1) and spokes (2) for
damage.
2. Tighten, any loose spokes to the specified
torque:
Spokes: 2.7 lbf·ft (3.7 N·m, 0.4 kgf·m)
3. Check wheel rim runout. If runout is
noticeable, see an official Honda Service
Manual for inspection instructions.
Also inspect the valve stems for their positions. A
tilted valve stem indicates the tube is slipping
inside the tire or the tire is slipping on the rim. See
your dealer.
See an official Honda Service Manual for
inspection information:
1. Check the axle shaft for runout.
2. Check the condition of the wheel bearings.
Wheel Rims & Spokes
(1) wheel rim (2) spokes
(2)
(1)
Axles & Wheel Bearings

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda CRF450L 2019 and is the answer not in the manual?

Honda CRF450L 2019 Specifications

General IconGeneral
Engine Type449cc liquid-cooled single-cylinder four-stroke
Bore x Stroke96.0mm x 62.1mm
Compression Ratio12.0:1
Fuel SystemProgrammed Fuel Injection (PGM-FI), 46mm throttle body
Transmission6-speed
Rear BrakeSingle 240mm disc
Front Tire80/100-21
Rear Tire120/80-18
Rake (Caster Angle)28.5°
Wheelbase58.9 inches
Seat Height37.1 inches
Fuel Capacity2.0 gallons
IgnitionFull transistorized ignition
Ground Clearance12.4 inches
Front Suspension49mm inverted fork; 12.0 inches of travel
Rear SuspensionPro-Link Showa single shock, adjustable spring preload, compression and rebound damping
Front BrakeSingle 260mm disc
Curb Weight289 pounds
Valve TrainUnicam four-valve
Final DriveChain
Trail4.6 inches (118mm)

Related product manuals