Honda HRN216VKA User Manual

12-3
HRN216 VARIABLE MOWING SYSTEM/ MOWER DECK/WHEELS
9. Separate the shutter from the Roto-Stop cover by rotating
the shutter until the four tabs align with the cutouts in the
Roto-Stop cover.
10. Remove the Clip Director cover from the mower deck by
removing the two screws.
INSTALLATION
1. Install the Clip Director cover onto the mower deck and
tighten the two screws.
2. Align the shutter with the Roto-Stop cover until the
four tabs align with the cutouts in the Roto-Stop cover, and
then turn the shutter so that it interlocks with cover.
ROTO-STOP
COVER
SHUTTER
TAB
(4)
SLOT
(4)
TAB
SLOT
SCREW (2)
SCREW (2)
REAR SHUTTER HOLDER
ROTO-STOP
COVER
SHUTTER
TAB
(4)
SLOT
(4)
TAB
SLOT

Honda HRN216VKA Specifications

General

Brand	Honda
Model	HRN216VKA
Category	Lawn Mower
Language	English