Honda VFR 800 User Manual

99
Information
Keys
Keys
Ignition key
The ignition key contains a special coded chip
that is recognized by the immobilizer system
(HISS) in order to start the engine. Handle the
key carefully to prevent damaging the HISS
components.
Do not bend keys or subject them to undue
●
stress.
Avoid prolonged exposure to sunlight or
●
high temperatures.
Do not grind, drill or in any way alter their
●
shape.
Do not expose to strong magnetic objects.
●
If you lose all keys and the key number plate,
the PGM-FI unit/ignition control module must
be replaced by your dealer. To avoid this, keep
a duplicate key.
If you lose a key, make another duplicate key
immediately.
To make a duplicate key and register it with
your HISS system, take the spare key, the key
number plate, and the motorcycle to your
dealer.
A metal key holder may cause damage to the
area surrounding the ignition switch.
32MGY600.indb 99 2011/01/11 16:28:36

Honda VFR 800 Specifications

General

Displacement	782cc
Compression Ratio	11.6:1
Transmission	6-speed
Bore x Stroke	72mm x 48mm
Final Drive	Chain
Front Suspension	43 mm telescopic fork, adjustable preload, compression and rebound damping
Front Brakes	Dual 296mm discs with CBS three-piston calipers
Rear Brakes	Single 256 mm disc with 2-piston caliper
Front Tire	120/70ZR-17
Rear Tire	180/55ZR-17