Honda VFR 800 User Manual

53
Maintenance
Tool kit
The tool kit is stored under the seat.
P.54
You can perform some roadside repairs,
minor adjustments and parts replacement
with the tools contained in the kit.
8 x 12 mm Open end wrench
●
10 x 14 mm Open end wrench
●
Standard/Phillips screwdriver
●
Screwdriver grip
●
5 mm Hex wrench
●
Fuse puller
●
The following tools are stored in the
compartment as shown.
Rear suspension adjustment pin spanner
●
Extension bar
●
Helmet set wire
●
a
Be careful not to damage the rear
brake reservoir with the loop ends of
the helmet set wire.
The following tool is also provided with your
motorcycle.
Drive chain adjustment pin spanner
●
a
Store the pin spanner in a safety place.
Rear suspension
adjustment pin spanner
Helmet set wire
Extension bar Tool kit
Drive chain
adjustment
pin spanner
32MGY600.indb 53 2011/01/11 16:27:59

Honda VFR 800 Specifications

General

Displacement	782cc
Compression Ratio	11.6:1
Transmission	6-speed
Bore x Stroke	72mm x 48mm
Final Drive	Chain
Front Suspension	43 mm telescopic fork, adjustable preload, compression and rebound damping
Front Brakes	Dual 296mm discs with CBS three-piston calipers
Rear Brakes	Single 256 mm disc with 2-piston caliper
Front Tire	120/70ZR-17
Rear Tire	180/55ZR-17