Honda VFR 800 User Manual

54
Maintenance
Removing & Installing Body Components
Seat
Seat
Ignition
key
Seat lock
Frame staysFuel tank
stays
Prongs
Hooks
❙
Removal
1. Insert the ignition key into the seat lock,
and turn and hold the key clockwise to
unlock the seat.
2. Pull the rear of the seat back and up.
❙
Installation
1. Install the seat while aligning its hooks
with the fuel tank stays and its prongs
with the frame stays.
2. Push forward and down on the rear of
the seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
underseat compartment.
32MGY600.indb 54 2011/01/11 16:28:00

Honda VFR 800 Specifications

General

Displacement	782cc
Compression Ratio	11.6:1
Transmission	6-speed
Bore x Stroke	72mm x 48mm
Final Drive	Chain
Front Suspension	43 mm telescopic fork, adjustable preload, compression and rebound damping
Front Brakes	Dual 296mm discs with CBS three-piston calipers
Rear Brakes	Single 256 mm disc with 2-piston caliper
Front Tire	120/70ZR-17
Rear Tire	180/55ZR-17