continued
To remove stubborn stains, use diluted
●
detergent and rinse thoroughly with plenty
of water.
Avoid getting petrol, brake fluid, or
●
detergents on the instruments, windscreen,
panels, or headlight.
Exhaust Pipe and Muffler
The exhaust is made of stainless steel, which
can become tarnished with burn marks if
splattered with oil or other substances when
hot. To remove burn marks, use a mild abrasive
compound. To remove dirt and mud, use a
kitchen cleaning solution for stainless steel and
wash with a soft sponge. Rinse with plenty of
water to remove all residue.
NOTICE
Even though the exhaust is made of stainless steel, it can
become stained. Remove all marks and blemishes as
soon as they are noticed.
Storing Your Motorcycle
If you store your motorcycle outdoors, you
should consider using a full-body motorcycle
cover.
If you won’t be riding for an extended period,
follow these guidelines:
Wash your motorcycle and wax all painted
●
surfaces (except matte painted surfaces).
Coat chrome pieces with rust-inhibiting oil.
Lubricate the drive chain.
●
P.49
Place your motorcycle on a maintenance
●
stand and position a block so that both tyres
are off the ground.
After rain, remove the body cover and allow
●
the motorcycle to dry.
Remove the battery (
●
P.60)
to prevent
discharge. Charge the battery
in a shaded,
well-ventilated area.
a
If you leave the battery in place,
disconnect the negative
terminal to
prevent discharge.
To Next Page
Loading...
Need help?
General
