TuxedoW Home Automation and Security System User Guide
5
User Codes
When users are added to the system, each is assigned a 4-digit user code. This code enables the user's access to features and
functions which she or he is authorized to use. For more information about assigning codes and defining each user's privileges, see
page 22.
Extended Functionality
Extended functions are those that can be accessed through a standard alpha keypad or through the Console Emulation Mode on the
TuxedoW Touchscreen. Refer to the alarm system's user guide for more information on these features.
Status LED
The LED to the left of the touchscreen shows different colors to indicate status:
To reset the system, press and hold the side power/reset button for 3 seconds and then touch the Press Here to Reset message on
the screen to begin the reset process. The system can also be reset by pressing and holding the power/reset button for approximately
15 seconds, until the system resets automatically.
Safe Mode
In the rare event your TuxedoW cannot successfully communicate in its graphic mode with the rest of the system, Safe Mode offers a
backup method to ensure that you can operate the system. See Safe Mode on page 24 for more information.
To Next Page
Loading...
Need help?
General
