TuxedoW Home Automation and Security System User Guide
29
Including (Adding) Z-Wave Devices in Your System
Each device must be installed according to the manufacturer’s instructions.
WARNING
Automation is intended for lifestyle convenience. Do not use automation for life safety and property protection.
Including a Light, Switch or Outlet Module
ICON ACTION NOTES
1. Plug the Z-Wave module into an AC outlet and plug
the lamp or other device into the Z-Wave module
2. On the Home screen, touch the Devices icon and
then SETUP to display the Z-Wave Device
Management screen
3. Press the ADD DEVICE icon. Tuxedo indicates
that the Inclusion process has begun.
4. Press the Function button on the device.
5. Tuxedo displays Device Added Successfully
Note: Z-Wave devices vary; consult the device manufacturer's
instructions for details, including the location of the Function
button.
• If a simple on/off device has been included, Tuxedo displays
an On/Off button on the Devices screen.
• If a dimmer module is added, an On/Off button and a dimmer
slide control are displayed.
To Next Page
Loading...
Need help?
General
