Honeywell 60 Series User Manual

Honeywell 60 Series IP Camera Software Configuration Guide
50
Configuring DDNS Settings
Go to SetupNetwork SetupDDNS.
This section describes how to configure the dynamic domain name service for the camera.
DDNS is a service that allows your camera, especially when assigned with a dynamic IP
address, to have a fixed host and domain name.
Figure 6-8 DDNS
Enable DDNS: Check to enable the DDNS setting.
Note
Before utilizing this function, apply for a dynamic domain account
first and then access the system through that domain. Refer to the
following link to apply for a dynamic domain account:
http://www.dyndns.com/
Provider: Select a DDNS provider from the dropdown list.
Camera name: Enter the camera name of your dynamic domain account.
User name: Enter the user name of your dynamic domain account.
Password: Enter the password of your dynamic domain account.
Configuring QoS Settings
Go to Setup Network Setup Qos.
Quality of Service (QoS) is a network security mechanism. It fixes problems with network
delays and jams. For network service, the quality of service includes the transmission
bandwidth, delay, and packet loss, for example. Through QoS, you can guarantee the
transmission bandwidth, reduce the delay, reduce the loss of data packets, and enhance the
transmission quality with packet prioritization.
To utilize QoS in a network environment, the following requirements must be met:
• All network switches and routers in the network must include support for QoS.

Honeywell 60 Series Specifications

General

Brand	Honeywell
Model	60 Series
Category	Security Camera
Language	English