EXCEL 50 MMI - USER GUIDE
EN2B-0222GE51 R0216 48
The fourth screen contains editable fields for configuring the controller-specific
hardware interfaces ("Contr. Setup"), choosing the application manually
("Select Applic."), downloading an application from either the PC-based
XI584 operator and service software or from the XBS Central A ("Requ.
Download"), and setting up the test mode with default data-point names ("DP
Wiring Check"). Move your cursor to the desired entry and confirm by pressing
the ENTER key. Depending upon your selection, you will proceed to one of the
series of screens described in the respective section below.
Hardware Interface Configuration
Selecting and confirming "Contr. Setup" will cause a listbox headed "HW-
Interf. Cfg." to appear (see Fig. 67).
To Next Page
Loading...
Need help?
General
