EXCEL 50 MMI - USER GUIDE
EN2B-0222GE51 R0216 50
Fig. 68. Choosing an application manually
Move the cursor to the desired application and confirm.
The initialization screen of the chosen application will appear. It displays
information about the versions of the controller and the application.
Bus numbers are appended automatically, except in the case of remote points. In
the case of remote points, the remote controller number must be entered in
through the data-points sequence.
NOTE: The controller's number is appended to the data-point's name (see also
section "Appending the Controller's Number to the Data-Points' Names")
in order to identify the controller to which it belongs.
In the following sequence of screens (see Fig. 69), the codes of the configurable
application can be changed. The application codes can be generated with the
"LIZARD-Excel 50 Application Selector".
Fig. 69. Sequence of configuration screen
NOTE: If the "LIZARD-Excel 50 Application Selector" is not available, please
contact your local Honeywell branch for support.
In the appropriate screen, move the cursor to the appropriate code and change its
value using the PLUS and MINUS keys.
When you are finished, go to the third screen, move the cursor to the "CONFIG"
field, and confirm.
To Next Page
Loading...
Need help?
General
