PAGE - 18 Programming Manual AM_8200
NOTIFIER ITALIA Doc. M-162.1-AM8200-ENG Rev A2 AM8200_manu-prog-ENG
To enter the system name press the enter key and use the alphanumerical keyboard to enter the text.
At the end press the Enter key to store the text.
Programming - Points
From the Programming menu by selecting the “Points” item is displayed the following screen, where you can
manually configure each type of addressable device on field ( Detectors or Modules ).
Detectors
DETECTORS
By selecting “DETECTORS” and by confirming the selection through the enter key
you enter the programming procedure for Addressable Sensors.
This procedure is composed of 4 programming folders (to access the folders use the arrow keys)
The display shows by default the first device of the first line.
To select another device use the function keys “- LINE” “+ LINE” ( Lines ) and “- DET” “+ DET”
(detectors )
Detectors MAIN TAB ( HW-Type ID and Text associated with the Detector )
Tap "DET" Number to open the following
window, from which you can directly enter
the number of the sensor to be programmed
without using the "+" and "-" keys.
To Next Page
Loading...
Need help?
General
