HP 16500C Programmer's Guide

Table 10-7 System Menu Values
Menu Command Parameters Menu
MENU 0,0 System Configuration menu
MENU 0,1 Hard disk menu
MENU 0,2 Flexible disk menu
MENU 0,3 Utilities menu
MENU 0,4 Test menu
MENU 0,5 Intermodule menu
Query :MENU?
The MENU query returns the current menu selection.
Returned Format
[:MENU] <module>,<menu><NL>
Example OUTPUT XXX;":MENU?"
MESE<N> (Module Event Status Enable)
Command :MESE<N> <enable_value>
The MESE command sets the Module Event Status Enable register. This
register is the enable register for the MESR register. The <N> index
specifies the module, and the parameter specifies the enable value. For the
HP 16500C alone, the <N> index 0 through 5 refers to system and modules 1
through 5 respectively. With an HP 16501A connected, the <N> index 6
through 10 refers to modules 6 through 10 respectively. Table 10-8 lists the
Module Event Status Enable register bits, bit weights, and what each bit
masks for the mainframe.
<N> An integer 0 through 10
<enable_value> An integer from 0 through 255
Mainframe Commands
MESE<N> (Module Event Status Enable)
10–16

HP 16500C Specifications

General

Brand	HP
Model	16500C
Category	Measuring Instruments
Language	English